The instructions given in this manual are concerned with this product
only. For the safety instructions of the programmable controller system,
please read the instruction manual carefully.
➢ The Electronic Controller (EC) automatically control the operation of
“Switch ON” and “Switch OFF” of the system (water pump & lights) based
on time set.
➢ The controller keeps track and displays the flow of current in the
system as long as the pump is ON to ensure smooth conduct of the system.
➢ The system automatically detects the power (current) used by the pump and
controls the pump accordingly, this assistance the system to identify
whether the pump is running on Normal mode or Dry Run, or On Overload.
➢ A controller can be used for all types of Single phase Monoblock or
Centrifugal Pump up to 3HP.
➢ It has a dual mode for operating of Pump i.e. Auto (timer) or manual
Switch.
➢ The System can control 2 devices at a time i.e.; One Pump and one light
(below 10A).
➢ The System is equipped with RTC (Real Time Clock) for the current time and
provides 3 timers option for pumps and lights.
➢ The system is controlled by one rotary switch.
a. Rotate the switch – For changing option.
b. Click the switch – For selecting.
Technical Characteristics
• Voltage: ~220/240V
• Maximum Current for Pump: 40A or 3HP
• Maximum Current for Light: 10A
• Frequency: 50/60Hz
• Digital Display (16character 2 lines)
• Rotary Switch
• RTC (Real Time Clock)
• 3 Timers in a Day
• Auto / Manual Switch
• Password Protection
• CR3032 Battery (inside the device for keeping current time)
